Browse all practice questions for the CSMLS Safety Manual Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Ace the CSMLS Safety Manual Test 2026 – Secure Your Safety Skills with Confidence! course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • During the decommission process, surfaces contaminated with which of the following may need to be cleaned?
  • If the victim is a contact lens wearer and the lenses cannot be removed immediately after exposure to a harmful substance, what should you do?
  • Can an automatic external defibrillator be used by someone who is not a trained medical professional?
  • What does WHMIS stand for?
  • Is the presence of trained first aiders in the workplace a legal requirement?
  • What are emergency response plans, training, and occupational health programs examples of?
  • A laboratory ventilation system should be designed to maintain what pressure within the lab?
  • Is general ventilation an important source of make-up air for local exhaust systems?
  • What is a key factor in the laboratory commissioning process?
  • WHMIS labels do not include:
  • Which type of biological indicator is most effective in validating the sterilization process?
  • What is a benefit of tracking inventory and hazardous materials?
  • Can personal monitoring be used to measure noise exposure?
  • Are standards for all chemicals that identify allowable levels of exposure available?
  • Based on pH values, which of the following solutions is the most corrosive?
  • Is a drench hose an acceptable replacement for an emergency shower?
  • Are psychological hazards considered in the hazard assessment process?
  • Should individuals receive training on hazardous waste management?
  • Name a radioisotope that should be shielded by Plexiglass and not lead.
  • Which hazardous substance may be detected as vapor from drain traps many years after its use?
  • Which organization mandates laboratory decommissioning when radioactive materials are used?
  • Is a canopy hood suitable for exhausting heat from an autoclave?
  • In the event of burns to the skin and clothing, what should be done with burned clothing?
  • When conducting decontamination, what is the main focus?
  • The following are potential sources of information on reproductive hazards:
  • What is an effective way to promote ergonomic practices among lab workers?
  • Which of the following diseases is a risk for animal care workers as well as expectant mothers handling domestic cat litter?
  • What type of materials require special attention during the decommission process?
  • What type of lighting is beneficial to reduce eye strain in a laboratory?
  • What is the role of BSCs in a laboratory setting?
  • What is the primary purpose of safety training in the workplace?
  • How often should inspections be conducted to identify potential hazards?
  • What considerations are included in ergonomics?
  • What is a recommended action after using a centrifuge for biological samples?
  • Which disinfectant is most commonly used in clinical laboratories?
  • What is the first step to take after a person has fainted?
  • Which of the following describes the role of administrative controls?
  • Protective glasses should have which of the following features?
  • What type of fire involves combustible metals?
  • What is a requirement for effective use of respiratory equipment?
  • Which type of radioactive particles presents the greatest risk once inside the body?
  • What is the primary purpose of documenting a laboratory security risk assessment?
  • Where should unwanted chemicals, biological specimens, and idle equipment be stored?
  • Routine practices and additional precautions integrate which two elements?
  • Lack of concentration and forgetfulness may be symptoms of stress. Is this statement true or false?
  • Are WHMIS labels required on hazardous waste?
  • Which level regulates other types of hazardous waste?
  • What is one possible consequence of not reporting missing hazardous materials?
  • Is it essential to document who should implement additional controls in a hazard assessment?
  • In the Internal Responsibility System model, management is required to:
  • What is a useful consideration during hazard assessment?
  • A cryogenic liquid is any liquid at a temperature below which of the following?
  • What should you do when leaving the lab with your lab coat?
  • When centrifuging biological agents, what should you do regarding the tubes used?
  • Which of the following are considered to be physical hazards?
  • How can one learn the proper use of fire extinguishers?
  • Before using an emergency shower, what should a person do with their outer clothing?
  • What are two "signal words" that may appear on supplier labels?
  • Which type of ventilation is typically used to control temperature in a lab environment?
  • Do a laboratory security risk assessment and a laboratory security program need to be documented?
  • Is it advisable for employees to take part in the hazards assessment and control process?
  • A fixed-position face shield may be used any time eye protection is required.
  • What is the primary purpose of the Safety Data Sheet (SDS)?
  • Is it advisable to send out hazardous waste frequently?
  • What aspect of risk assessment assesses the degree of harm that may arise?
  • Working with lasers requires what specific item?
  • Which of the following is NOT a key element of a hazard assessment?
  • Is it sufficient to rely solely on labeling for safety when handling hazardous waste?
  • Class B fires involve:
  • Must proper ergonomics and ventilation integrity be considered when working in a biosafety cabinet (BSC)?
  • What is the primary aim of personal protective equipment (PPE)?
  • What should you do with sharp objects in the lab?
  • Why is it important to have a safety committee in a workplace?
  • Work-life conflict describes an imbalance between:
  • When should maintenance checks of emergency eye wash stations be conducted?
  • Is general ventilation considered the primary means of controlling exposure to volatile toxic products in the lab?
  • Which of the following practices can enhance laboratory safety?
  • When in the lab, when is it appropriate to wear safety glasses?
  • What is a recommended practice for maintaining ergonomic health while working?
  • How should highly hazardous materials be stored?
  • How frequently should emergency eye wash stations be activated to ensure a reliable supply of clean water?
  • If you have a safety issue that you cannot solve you should first contact:
  • Reproductive hazards affect females only.
  • Outcomes of pregnancy are mostly affected by work factors.
  • Is it important to use an anti-glare shield on your computer monitor?
  • What is the objective of using a Biological Safety Cabinet?
  • Risk groups are classified primarily by considering which factor?
  • Which condition should laboratory staff be trained to recognize during commissioning?
  • Which of these practices can reduce the potential for musculoskeletal injuries?
  • Can some infectious substances be absorbed via the eyes?
  • Why is it important to inspect tubes for cracks before centrifugation?
  • Canadian laboratories are governed by:
  • What is a key factor to consider when designing a laboratory space?
  • When handling biological specimens, what is paramount?
  • Technostress can be a result of:
  • Which document provides detailed information about the hazards of materials used in a workplace?
  • Many provinces have legislation to deal with hazards of working alone. Is this statement true or false?
  • Which of the following is essential for managing eye hazards in a laboratory environment?
  • Are procedure/surgical masks effective in protecting healthcare workers during procedures?
  • Which of these types of ionizing radiation is most penetrating?
  • What is the requirement for lab coats in a laboratory setting?
  • What is a precaution for the use of water baths?
  • A workplace label is not required if a transferred material is completely used over the course of the same work shift:
  • Workplace factors that may cause stress include:
  • When is it important to take regular breaks?
  • What was the purpose of Threshold Limit Values (TLVs)?
  • If a tube with infectious materials breaks during centrifugation in a centrifuge that does not have safety cups, how long should you wait before opening the centrifuge?
  • The CSA group has published standards related to:
  • The supplier label includes:
  • In risk assessment, the likelihood of a hazard resulting in an injury is referred to as what?
  • Is the laboratory commissioning process necessary at the start of each new year?
  • Which of the following statements about lab coats is incorrect?
  • Which of the following is a common ergonomic hazard in the laboratory?
  • Who should conduct task hazard analysis?
  • Biological agents can gain entry to the body by which of the following methods?
  • Why is it important for lab personnel to understand emergency protocols?
  • Which of the following is an example of ionizing radiation?
  • Commissioning refers to the process of what in a laboratory?
  • What is considered an administrative control for biological hazards?
  • Is it acceptable to work alone after hours in a familiar lab?
  • Can small amounts of volatile chemicals be used on the bench outside the hood?
  • Do mechanical pipetting devices eliminate all hazards associated with pipetting?
  • Why is it critical to correctly label hazardous waste?
  • What is a common sign of shock following an injury?
  • What is the recommended immediate response if someone splashes a corrosive substance in their eyes?
  • Should slides that are not fixed or stained be considered infectious?
  • The best type of control to protect from reproductive hazards is:
  • How many castors should a chair have for optimal stability?
  • Effective communication about stressors should ideally be directed towards:
  • Which of the following is NOT considered a major element of workplace safety?
  • For ultracentrifuges, why is it important to balance them very accurately?
  • Do laboratory personnel need to participate in workplace emergency training?
  • What is the term for procedures that combine the requirements of both Universal Precautions and Body Substance Isolation?
  • An example of what type of control is full body coverage with personal protective equipment?
  • The ability to cause changes in the DNA of cells is called:
  • What is the primary purpose of laboratory decommissioning?
  • Which of the following activities can diminish air quality?
  • SDS for products used in the lab must be accessible:
  • Record keeping and documentation are important ways to demonstrate enforcement and accountability:
  • How should lab gowns be designed?
  • At what classification level do lasers present a risk of eye injury from a reflected beam?
  • Which of these symptoms may be caused by excessive psychological stress?
  • What type of filters do BSCs use to remove aerosols?
  • Compressed gas cylinders should be securely attached no matter whether they are full or empty.
  • What should you do if you have a chemical spill?
  • What is the purpose of an emergency eye wash station?
  • If a waste disposal company has a license, can it be assumed they are trustworthy?
  • Have the majority of laboratory acquired infections been associated with injuries from needles or sharp objects?
  • Which of the following is true about respirators?
  • What is a common use of incident reports in a workplace?
  • Which agent can combine with copper in a drain to create a potentially explosive compound?
  • How are hazard assessments beneficial?
  • What should the activity level on surfaces be reduced to when decontaminating areas where radioactive materials were used?
  • What can be said about all hazards?
  • What should you assume about unknown products?
  • What type of ventilation dilutes indoor air with a supply of fresh air?
  • Which of the following is an effect on the male reproductive system?
  • Is it acceptable to leave your lab unlocked and unattended for a few moments while you go to the washroom?
  • If an eye hazard is present, what immediate action should be taken if exposed?
  • PPE is considered a substitute for engineering controls when they are too expensive to implement.
  • In the event of a cut, what is the first aid procedure?
  • What must be performed on laboratory equipment before it is deemed safe for demolition?
  • Which of the following is NOT a category of hazard?
  • What should be done if someone ingests a poison?
  • What type of footwear is required in a lab environment?
  • Which of the following hazards can be posed by centrifuges?
  • The majority of clinical/diagnostic laboratories adhere to procedures for which containment level?
  • Why should gloves be latex-free in clinical settings?
  • What is a commercial waste disposal method for waste solvents?
  • What may help to identify laboratory hazards?
  • The best way to reduce workplace stress is:
  • Should a person wearing contact lenses remove the lenses before using an emergency eye wash?
  • Which of the following requires routine practices and additional precautions?
  • If modification of work tasks is not possible, it is advisable to temporarily reassign the pregnant employee to safer work or a safer workplace.
  • Is mouth pipetting acceptable?
  • In the Internal Responsibility System model, employees are required to:
  • Which of the following is NOT a characteristic of containment level 2 laboratories?
  • Which of the following can produce aerosols?
  • Which of the following is a symptom of excessive psychological stress?
  • What is the best approach for dealing with a chemical spill?
  • A typical recommended face velocity for a fume hood is?
  • What does commissioning of a laboratory ventilation system entail?
  • Which factor does not influence the likelihood of an infection occurring from aerosol exposure?
  • What is the lowest current that has the potential to cause a fatality from a 110 volt power source?
  • What is the best way to prevent accidents in the lab?
  • What is task hazard analysis primarily used for?
  • After conducting an initial inventory of hazardous material, should it be repeated?
  • Which of the following is NOT a method for managing waste solvents?
  • What is the minimum duration that an emergency wash device should provide water?
  • What does a signal word on a label indicate?
  • During a chemical spill, what is the best immediate response regarding eye hazards?
  • If the skin blisters from burning, should you drain the blisters immediately?
  • The types of chemicals which are readily absorbed into the bloodstream also have a tendency to migrate into breast milk.
  • Which type of hazard necessitates having an emergency eye wash station present?
  • What should you do in the event of a splash of a corrosive product on the skin?
  • Cryostats used on a suspected CJD case should be decontaminated with what?
  • A BSC should be used for procedures involving open vessels of biohazards that:
  • What do procedure/surgical masks primarily protect against?
  • What information should be included in hazard assessment documents?
  • Which type of control is considered the best in the hierarchy of controls?
  • Modern laboratory equipment requires little if any maintenance.
  • What is the importance of labeling waste before disposal?
  • What is the name of the agency responsible for radiation safety regulation in Canada?
  • What temperature range is classified as tepid water?
  • Three major elements of WHMIS are:
  • What is the key focus when conducting a hazard assessment?
  • When treating a burn, what should be avoided during first aid?
  • Is it a requirement for emergency wash devices to have a drain?
  • What are the major ways to deal with risk in the workplace?
  • What factor contributes to technostress?
  • Which of the following is included in the definition of hazardous wastes?
  • In the event of an emergency, who should be immediately notified?
  • How is the implementation of controls addressed in hazard assessment processes?
  • What is one essential action for workplace hazard control?
  • Is decontamination of a laboratory necessary if it is to be demolished?
  • The risk associated with any chemical substance depends on:
  • What type of equipment may improve ergonomics in a laboratory setting?
  • Which of the following is true regarding gloves in a clinical setting?
  • Which approach is least likely to help reduce workplace stress?
  • In risk assessment, why is it important to consider how often workers are exposed to a hazard?
  • The concept in legislation that indicates that employers must do everything reasonable to protect the health and safety of workers is referred to as:
  • Which of the following is not considered a local exhaust device?
  • What should be done if hazardous material is missing?
  • Does each province in Canada have a designated site for the disposal of radioactive wastes?
  • Should hazard assessment procedures include identifying control measures using the hierarchy of controls?
  • Does a needle-stick injury need to be reported if an infection does not develop?
  • Where should an emergency eye wash station be located?
  • Workplace stresses common in the laboratory include:
  • Which of the following is advised when working extensively at a computer?
  • Employers are required to provide PPE, but they are not required to enforce its use.
  • What is the primary purpose of a chemical fume hood?
  • Which of the following are considered reproductive hazards?
  • In a laboratory setting, who is primarily responsible for safety?
  • What is an important factor in maintaining a clean lab environment?
  • What is the best type of indicator to confirm effective autoclave use?
  • What is the main purpose of wearing proper footwear in a lab setting?
  • What role does severity play in risk assessment?
  • What key factor does NOT contribute to the determination of infection susceptibility?
  • In the event of a clothing fire, what is the most appropriate action?
  • What is one potential consequence of workplace stress in laboratory settings?
  • What kind of wastes must be managed under strict regulations due to potential hazards?
  • Which of the following practices can help alleviate musculoskeletal stresses?
  • Do noise and indoor air quality issues impact injuries and illnesses but not cause psychological stress?
  • Which of the following is true regarding PPE during hazardous material handling?
  • Are adjustable lab stools necessary for accommodating various users?
  • Which safety measure should be taken when using blenders in the lab?
  • Relative humidity levels indoors should be maintained within which range?
  • Who is primarily responsible for controlling access to the lab?
  • A biological safety cabinet must be tested and certified under which circumstance?
  • What should be done with waste generated from biological experiments involving aerosols?
  • Bullying is a form of abuse. Is this statement true or false?
  • What type of centrifuge should be used for handling hazardous materials?
  • When should local exhaust ventilation systems regularly be inspected?
  • A good safety culture promotes:
  • Are incidents involving psychological harassment the employer's responsibility?
  • Name a chemical which becomes explosive when it becomes dry:
  • At what level is radioactive waste regulated?
  • The Canada Criminal Code applies to laboratories and medical facilities:
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy